Quality and certification

Quality and certification

Bollé Safety products meet the most stringent international standards.

Products tested and certified

Bollé Safety lens and frame markings are specific to each product. Each marking corresponds to a very specific use. Certified by independent laboratories this information guarantees protective eyewear quality and resistance.

The Z87.1 2003 standard previously classified personal protectors as “basic or high impact” devices. In the ANSI Z87.1-2010 standard, personal protectors are rated as either “impact” or “non-impact” protectors. To be considered an impact protector, the device must meet the high velocity and high mass tests. Once these devices have passed the test, they will carry the Z87+ stamp on both the frame or lens housing and lens. Additionally, prescription products meeting this requirement will carry the marking Z87-2+. Non-impact protectors (those that do not pass all high-impact testing) will be designated only as Z87 (not to include the + sign).

Spectral transmittance categories have been expanded to allow matching and selection of filters for radiation hazards in greater specificity than the previous standard.

Dust-The new standard has expanded to assist users in identifying specific protectors that may be appropriate for the hazard. The following markings indicate the hazard. D3-Liquid Splash, D4-dust, D5-fine dust. This rating will be marked on the lens and the frame of the approved device.

Bollé Safety offers a wide range of safety eyewear with optical markings specific to each risk and type of activity.

What is the assessment of occupational hazards?
Assessment of occupational hazards involves identifying and ranking hazards in the workplace to implement relevant protective measures. It is the initial step in occupational health and safety. It is essential to check adequacy between product markings and standards markings.

Brief Overview of the ANSI Z87.1-2010 Standard
On April 13, 2010 the American National Standards Institute (ANSI) announced a new edition of the ANSI/ISEA Z87.1 standard. The new edition titled, “American National Standards Institute for Occupational and Educational Personal Eye and Face Protective Devices” updates the previous version, Z87.1-2003.

Significant Changes to the Standard
The new standard is hazard based requiring employers to select protective devices based upon the workplace. This is a change compared to the 2003 standard, which focused on the protector type. Specific evaluation is now required for workplace hazards such as impact, optical radiation, droplet and splash, dust and fine dust particles. As the 2010 standard is radically different, the product markings have changed. Users will need education on matching the hazard that they need protection from with the marking on the product.


Impact Impact Rated Plano
Impact Rated Prescription
Non-impact Plano
Lens type Clear
UV filter
Visible Light Filter
IR Filter
Variable Tint
Special Purpose
W and Shade Number (Shades range from 1.3 to 14 - the higher the number the darker the lens)
U and Scale Number (Scale ranges from 2 to 6 - the higher the number the highest protection from far and near UV)
L and Scale Number (Scale ranges from 1.3 to 10 - lower numbers providing greater light transmittance)
R and Scale Number (Scale ranges from 1.3 to 10)
Use Splash / Droplet
Fine Dust

From manufacturing to logistics

All Bollé Safety products are subject to regulation REACH (Registration, Evaluation and Authorization of Chemicals), which ensures that all substances used on Bollé Safety products do not harm health or the environment.
Finally, in 2010, the Bollé Safety logistics platform is ISO14001 certified, based on the principle of continuous improvement in environmental performance by controlling impact associated with the activity of the company.